LJ-TICK InAmp Labjack

    SEAP
    ID
    DA8789935
    Data
    11 Iulie 2016
    Valoare
    310 RON
    Stare
    Oferta acceptata
    Autoritatea contractanta
    4701606 - UNIVERSITATEA TEHNICA GHEORGHE ASACHI DIN IASI
    Localitate
    Iasi, Iasi
    Furnizor
    14838458 - S.C. EPI-SISTEM S.R.L.
    Tipul contractului
    -
    Cod CPV
    31712113-5 - Cartele cu circuite integrate (Rev.2)
    Descriere:
    LJ-TICK InAmp Labjack
    Achizitii
    310 RON
    Cantitate: 4
    Unitate masura: bucata
    LJ-TICK InAmp Labjack
    Modul de conditionare semnal analogic (amplificare semnal ) cu doua canale si mai multe nivele de amplificare. Se utilizeaza cu placile de achizitie semnal analogic Labjack tip U3 si UE9. Sunt prezentate mai jos specificatiile date de producator. Parameter Conditions Min Typical Max Units General Supply Voltage 3.6 5 5.5 volts Supply Current (1) No Loads 1.5 mA Operating Temperature -40 85 °C Signal Specs Gain Accuracy 0.35 % Offset Accuracy G = 1 0.5 % G = 11 0.5 % G = 51 2.5 % G = 201 10 % Input Bias Current (3) 17 nA Input Impedance 2 GW Each Input vs. GND (2) Normal Operation -0.3 to +5.3 volts Each Input vs. GND (3) No Damage -10 to +15 volts Typical Output Range Load = 10 kW 0.01 VS - 0.5 -3 dB Bandwidth x1 18 kHz x11 18 kHz x51 18 kHz x201 10 kHz Vref Output Voltage 2.495 2.50 2.505 volts Initial Accuracy 0.2 % Current Output (1) For rated V accuracy 0 25 mA