LANTIME M300 NTP Server

    SEAP
    ID
    DA6806492
    Data
    15 Mai 2015
    Valoare
    16.650 RON
    Stare
    Oferta acceptata
    Autoritatea contractanta
    32722680 - Agentia pentru Agenda Digitala a Romaniei
    Localitate
    Bucuresti, Bucuresti
    Furnizor
    5394305 - S.C. UTI GRUP S.A.
    Tipul contractului
    -
    Cod CPV
    48820000-2 - Servere (Rev.2)
    Descriere:
    NTP time server for 19" installation with management CPU and internal time reference: GPS satellite receiver/radio clock with TCXO Timebase *) - Meinberg GPS antenna input, BNC female connector, isolated 2 x LAN interface 10/100 MBit, RJ45 connector 1 x Terminal RS232 interface, 9pin D-Sub male connector for initial setup and configuration 1 x USB Service interface 1 x LC-Display (2 x 40 characters) and 8 push buttons ---------------------------------------------------------------------------------------------- Signal Outputs: 2 x RS232 interface, independent, 9pin D-Sub female connector, with multi data formats timestrings. 1 x PPS, TTL into 50 ohm, pulse duration 200 msec, active high, female BNC connector 1 x Standard Frequency 10 MHz, TTL into 50 ohm, female BNC connector 1 x Alarm Relay Output, change-over contact, 3pin DFK connector ---------------------------------------------------------------------------------------------- Technical specifications: Power supply: 100-240 V AC (50-60 Hz) Power consumption: max. 30 W 19" metal chassis, 1 U/84 HP (483 mm wide x 43 mm high x 285 mm deep)
    Achizitii
    16.650 RON
    Cantitate: 1
    Unitate masura: bucata
    LANTIME M300 NTP Server
    NTP time server for 19" installation with management CPU and internal time reference: GPS satellite receiver/radio clock with TCXO Timebase *) - Meinberg GPS antenna input, BNC female connector, isolated 2 x LAN interface 10/100 MBit, RJ45 connector 1 x Terminal RS232 interface, 9pin D-Sub male connector for initial setup and configuration 1 x USB Service interface 1 x LC-Display (2 x 40 characters) and 8 push buttons ---------------------------------------------------------------------------------------------- Signal Outputs: 2 x RS232 interface, independent, 9pin D-Sub female connector, with multi data formats timestrings. 1 x PPS, TTL into 50 ohm, pulse duration 200 msec, active high, female BNC connector 1 x Standard Frequency 10 MHz, TTL into 50 ohm, female BNC connector 1 x Alarm Relay Output, change-over contact, 3pin DFK connector ---------------------------------------------------------------------------------------------- Technical specifications: Power supply: 100-240 V AC (50-60 Hz) Power consumption: max. 30 W 19" metal chassis, 1 U/84 HP (483 mm wide x 43 mm high x 285 mm deep)