Echipamente pentru proiect cercetare GNaC2023_ID_275/2024 - ETTI

    SEAP
    ID
    DA36623694
    Data
    02 Octombrie 2024
    Valoare
    12.557,3 RON
    Stare
    Oferta acceptata
    Autoritatea contractanta
    4701606 - UNIVERSITATEA TEHNICA GHEORGHE ASACHI DIN IASI
    Localitate
    Iasi, Iasi
    Furnizor
    30369620 - Chemicalls Lab Supliers SRL
    Tipul contractului
    Furnizare
    Cod CPV
    31711100-4 - Componente electronice (Rev.2)
    Descriere:
    Echipamente pentru proiect cercetare GNaC2023_ID_275/2024 conform ofertei cu nr inreg de la furnizor 24307/30.09.2024
    Achizitii
    12.557,3 RON
    Cantitate: 1
    Unitate masura: bucata
    Echipamente pentru proiect cercetare GNaC2023_ID_275/2024 - ETTI
    Lot 1 - Echipamente pentru proiect cercetare GNaC2023_ID_275/2024 Contine: Blade RF 2.0 Micro xA4 - model Starter Modelul Starter Pack include: 1x bladeRF 2.0 micro xA4 1x bladeRF 2.0 micro case 2x GSM Antennas 1x USB 3.0 SS Cable Buc 1 BT-100 Bias-Tee Amplifier Features Mini-Circuits PHA-1H+ MMIC Amplifier – 50MHz to 6GHz MMIC Power consumption: 200mW Blue LED power indicator Typ Gain: +15.6dB @ 200MHz, +10.7dB @ 2.4GHz Low TX Noise Figure High output IP3 point Buc 2 BT-200 Bias-tee Low Noise Amplifier Features Mini-Circuits TSS-53LNB+ MMIC Low Noise Amplifier – 0.5GHz to 5GHz MMIC Power consumption: 300mW Green LED power indicator Ultra low Noise Figure Typ Gain: +20.2dB @ 200MHz, +16dB @ 2.4GHz LNA enters bypass mode when port is unpowered (4dB IL) Buc 2 Tri-Band Antenna Product includes: 1x Tri-Band Antenna Highlights: Type: Durable Rubber Antenna Antenna Interface: SMA male connector Frequency Range: 700-2600MHz Gain: 5 dBi VSWR: no more than 1.5 11 inches long Flexible mount (range of motion is 100 degrees) Compatibility: All bladeRF 1.0 and 2.0, BT-100, and BT-200 devices Buc 4 Flipper zero - Dispozitiv de scanare RF și de control (Flipper Zero) Pachetul include 1x Flipper Zero 1x Kingston 32GB microSD card 1x Silicone Protective Case 1x Video Game Module 1x Wifi Dev Board 3x GPIO Prototyping Boards 3x Screen Protectors Buc 1 Nordic Thingy:53 + WiFi Expansion Board for Thingy:53 - Dispozitiv de dezvoltare aplicații Bluetooth cu senzori (Nordic Thingy:53) Manufacturer: Nordic Semiconductor Product Category: Development Boards & Kits - ARM RoHS: Product: Development Boards Core: ARM Cortex M33F Tool Is For Evaluation Of: nRF5340 Brand: Nordic Semiconductor For Use With: Processor Product Type: Development Boards & Kits - ARM Accsorii incluse: - Placa de extensie wi-fi Buc 5 Power Profiler Kit NRF-PPK2 - Dispozitiv de monitorizare a puterii (NRF-PPK2) Key features 200nA to 1A current measurement range with a resolution that varies between 100nA and 1mA Source mode and ampere meter mode Source mode includes built-in programmable regulator with a 0.8V to 5V output range and up to 1A current supply 100 ksps sampling rate (10 x greater than previous generation) Standalone unit 8 digital inputs for low-end logic analyzer support Measure instantaneous and average current on all Nordic DKs, in addition to custom boards Supported through nRF Connect for Desktop’s Power Profiler app Export measurement data for postprocessing Applications Power debugging of embedded applications Estimate battery lifetime of completed solution Kit content Power Profiler Kit II board 4-pin current measurement cable, 10-pin logic port cable Buc 3 Raspberry Pi 5 + Carcasa + ventilator + sursa de alimentare pentru Raspberry Pi 5/8GB - 40-pin GPIO header - 2 × micro HDMI - 2 × USB 2.0 - 2 × USB 3.0 - 2 × CSI camera/DSI display ports single-lane PCIe FFC connector - UART connector RTC battery connector - four-pin JST-SH PWM fan connector PoE+-capable Gigabit Ethernet (1Gb/s) - 2.4/5GHz dual-band 802.11ac Wi-Fi 5 - (300Mb/s) - Bluetooth 5, Bluetooth Low Energy (BLE) microSD card slot - USB-C power (5V, 5A (25W) or 5V, 3A (15W) with a 600mA peripheral limit) Pachetul include: - Carcasa, - rdiator aluminiu cu ventilator, - sursa alimentare Miuzei Case for Raspberry Pi 5 with 5 V Power Supply Active Cooler, Acrylic Clear Case for Raspberry Pi 5 with 5.1 V 5A Adapter Type-C Power Supply, Official Fan PC Heatsink Fan for Raspberry 5 8 GB 4 Buc 2 Card SD pentru Raspberry Pi 5 Tip MicroSD cu adaptor SD, de tip Extreme Capacitate (minim) 64 Gb Viteza de citire secvențială minim 180 MB/s, Viteza de scriere secvențială minim 80 MB/s Buc 4 WiFi+Sensors board - ESP32-C3-DevKit-RUST-1 Manufacturer: Espressif Product Category: Development Boards & Kits – ARM Series: ESP32-C3 Product: Development Kits Tool Is For Evaluation Of: ESP32-C3 Brand: Espressif Systems Product Type: Development Boards & Kits – ARM Buc 3