Mix gax 9,3% ; butelie 10 L + verificare Pletismograf

    SEAP
    ID
    DA36229703
    Data
    31 Iulie 2024
    Valoare
    6.400 RON
    Stare
    Oferta acceptata
    Autoritatea contractanta
    4192960 - SPITALUL CLINIC COLTEA
    Localitate
    Bucuresti, Bucuresti
    Furnizor
    16020624 - S.C. NEWMEDICS COM S.R.L. S.R.L.
    Tipul contractului
    Furnizare
    Cod CPV
    98300000-6 - Servicii diverse (Rev.2)
    Descriere:
    Mix gas 9,3% He,19% O2,rest N2,pentru MS PFT Pro - 1 buc Steel Gas Cylinder 10L - 1 buc Verificare MasterScreen Body-Diff - 1 buc
    Achizitii
    3.250 RON
    Cantitate: 1
    Unitate masura: bucata
    Mix gas 9,3% He,19% O2,rest N2,pentru MS PFT Pro
    Mix gas 9,3% He,19% O2,rest N2,pentru MS PFT Pro (necesita art.892542)
    1.950 RON
    Cantitate: 1
    Unitate masura: bucata
    Steel Gas Cylinder 10L
    Butelie de 10 L (fara gaz).
    1.200 RON
    Cantitate: 1
    Unitate masura: bucata
    Verificare MasterScreen Body-Diff
    Verificare aparat Jaeger MasterScreen Body-Diff. Se verifica: - ambient module - pneumotach O-rings - zero and gain at the PT-pressure transducer (use EASI-Test and reference PT-screen) - zero (and gain*) at the PV-pressure transducer (use EASI-Test and reference pressure*) - shutter valves for easy rotation (torque) - shutter valve for leak - PT-flange, fittings and plastic elbows for cracks (replace if necessary) - zero and gain at PB- and PV-pressure transducer (use EASI-TEST and Body Calibration) - flexible tube for wear and leak (replace if necessary) - check temperature insulation at Helium sensor (p/n 845 568) - analyzer (sample) pump alignment and adjust if necessary - zero and gain factor at the CO analyzer fuel cell (use EASI-Test and gas calibration; analyzer fuel cells with gain factor >1.6 should be replaced) - support arm tension (brake screw) - 50ml sine pump - Body Close Valve hub - Pressure Safety Valve (if available) for leak and proper function (o-ring 851032) - all 3 door lock brackets (replace if necessary) - body box for leak (use body box calibration) Precizari aditionale: componente de service care nu fac parte din procedura de intretinere preventiva si nu se afla in stoc vor fi comandate laproducator,in cazul in care necesita schimbarea lor ,timpul standard de livrare este de 2-6 saptamani(dupa 12 ani se intampla sa nu mai fie disponibile)