Tester cabluri UTP/STP FORSCHER FS-8117 (tester lungime, calitate cablu, atenuare, ping, tensiune Po

    SEAP
    ID
    DA35246639
    Data
    13 Martie 2024
    Valoare
    933 RON
    Stare
    Oferta acceptata
    Autoritatea contractanta
    4291751 - INSPECTORATUL DE POLITIE SALAJ
    Localitate
    Zalau, Salaj
    Furnizor
    26051890 - S.C. DIPOL CONNECT S.R.L.
    Tipul contractului
    Furnizare
    Cod CPV
    32422000-7 - Componente de retea (Rev.2)
    Descriere:
    General view View with the probe View with the probe The accessories included View of the device in its carrying case The FS8117 tester is used for measuring cable continuity, cable length, attenuation of individual pairs, PoE voltage measurement and distance to cable damage. It allows to detect connection faults in UTP/STP, telephone and coaxial cables. Additionally, FS8117 tester is equipped with advanced cable pair locator. It is based on a unique technique that combines the generation of both analog and digital tones allowing for significantly increased accuracy in locating cable bundles. High sensitivity allows searching for cables even under plaster up to the depth of 100 cm. The "Find Port" function for fast localization of a port in a network device found only in advanced network testers. Moreover, the FS8117 tester has the function to measure up to 9 cables at the same time thanks to additional terminators ID2-ID9N70511, ID1 - built into the multifunction probe. Key features: On-screen menu in 2 languages: Polish, English 2.4-inch TFT-LCD screen, 320x240 resolution Digital mode inductive probe, filters noise and false signals, quickly and easily locates cables High power allows searching in walls, floors, in the ground up to 1 meter depth. Cable types tested: 5, 5e, 6, 7 (UTP/STP), telephone, coaxial TDR test of RJ45 cable, test the quality, length and attenuation of cables. Flash port, router port search, Minimum length of tested cabl
    Achizitii
    933 RON
    Cantitate: 1
    Unitate masura: bucata
    Tester cabluri UTP/STP FORSCHER FS-8117 (tester lungime, calitate cablu, atenuare, ping, tensiune PoE, etc.)
    General view View with the probe View with the probe The accessories included View of the device in its carrying case The FS8117 tester is used for measuring cable continuity, cable length, attenuation of individual pairs, PoE voltage measurement and distance to cable damage. It allows to detect connection faults in UTP/STP, telephone and coaxial cables. Additionally, FS8117 tester is equipped with advanced cable pair locator. It is based on a unique technique that combines the generation of both analog and digital tones allowing for significantly increased accuracy in locating cable bundles. High sensitivity allows searching for cables even under plaster up to the depth of 100 cm. The "Find Port" function for fast localization of a port in a network device found only in advanced network testers. Moreover, the FS8117 tester has the function to measure up to 9 cables at the same time thanks to additional terminators ID2-ID9N70511, ID1 - built into the multifunction probe. Key features: On-screen menu in 2 languages: Polish, English 2.4-inch TFT-LCD screen, 320x240 resolution Digital mode inductive probe, filters noise and false signals, quickly and easily locates cables High power allows searching in walls, floors, in the ground up to 1 meter depth. Cable types tested: 5, 5e, 6, 7 (UTP/STP), telephone, coaxial TDR test of RJ45 cable, test the quality, length and attenuation of cables. Flash port, router port search, Minimum length of tested cable: 1m "Find port" function for quick port search on network devices PING test, checks if the Ethernet port of IP camera or other network device is working properly, if the IP address is correct. Pair integrity test PoE conductor voltage measurement IP Scan, quickly finds the IP address of an IP camera or other network equipment that is connected to the meter Quick identification of the connected network port - speed (10/100/1000M) and duplex mode (full duplex/half duplex) Auto shutdown when idle Battery low indicator Storage of measurement results in the device memory Lithium-ion 3.7 V/2000 mAh battery, operation time 18 hours after 3 hours of charging.