Taiko PDL M1

    SEAP
    ID
    DA31633913
    Data
    14 Octombrie 2022
    Valoare
    43.450 RON
    Stare
    Oferta acceptata
    Autoritatea contractanta
    28521106 - INSTITUTUL DE STIINTE SPATIALE-FILIALA INFLPR
    Localitate
    Magurele, Ilfov
    Furnizor
    15595373 - S.C. APEL LASER S.R.L.
    Tipul contractului
    Furnizare
    Cod CPV
    31712348-1 - Diode laser (Rev.2)
    Descriere:
    Taiko PDL M1 High-End Picosecond Diode Laser Driver Internal Oscillator Type crystal locked Operation mode pulsed, burst or continuous wave (CW) Repetition frequency range 1 Hz to 1 MHz in steps of 1, 2 or 5 times various powers of ten 1 to 100 MHz in steps of 1 MHz Low jitter < 20 ps (FWHM), typ. 3-5 ps (FWHM) External Trigger Input Input voltage range -5 to +5 V (TTL compatible) Trigger level (adjustable) -1 to +1 V Required pulse width > 5 ns Delay trigger input to optical output: typ. 16 ns, jitter < 20 ps trigger input to sync output: typ. 6 ns Frequency range single shot to 90 MHz Input impedance 50 Ohms Connector BNC socket (female) Synchronization Output Amplitude < -800 mV into 50 Ohms (NIM) Pulse width 5 ns Delay sync output (falling edge) to laser output: typ. 10 ns, jitter < 20 ps Input impedance (destination) 50 Ohms Connector SMA socket (female) Gating Inputs Fast gate pulsed or burst mode: transition time typ. 10 ns CW mode: rise time typ. 5-10 µs (from 0% to 80-90% of max. CW emission power, wavelength dependent) user selectable input impedance: 10 kOhms with pull-up or 50 Ohms pull-down Connector type 1-pin LEMO socket - 00.250 series Example: FFA.00.250.NTA Slow gate transition time < 1 ms Connector type 1-pin LEMO socket - 00.304 series Example: FGG.00.304.CLA Remote Interlock Voltage < 16 VDC Loop resistance 10 Ohms maximum Remote interlock connectors Lemo 00.304 and banana socket Computer PC interface USB 2.0 Operating system WindowsTM 8 / 8.1 / 10 Power
    Achizitii
    43.450 RON
    Cantitate: 1
    Unitate masura: bucata
    Taiko PDL M1
    Taiko PDL M1 High-End Picosecond Diode Laser Driver Internal Oscillator Type crystal locked Operation mode pulsed, burst or continuous wave (CW) Repetition frequency range 1 Hz to 1 MHz in steps of 1, 2 or 5 times various powers of ten 1 to 100 MHz in steps of 1 MHz Low jitter < 20 ps (FWHM), typ. 3-5 ps (FWHM) External Trigger Input Input voltage range -5 to +5 V (TTL compatible) Trigger level (adjustable) -1 to +1 V Required pulse width > 5 ns Delay trigger input to optical output: typ. 16 ns, jitter < 20 ps trigger input to sync output: typ. 6 ns Frequency range single shot to 90 MHz Input impedance 50 Ohms Connector BNC socket (female) Synchronization Output Amplitude < -800 mV into 50 Ohms (NIM) Pulse width 5 ns Delay sync output (falling edge) to laser output: typ. 10 ns, jitter < 20 ps Input impedance (destination) 50 Ohms Connector SMA socket (female) Gating Inputs Fast gate pulsed or burst mode: transition time typ. 10 ns CW mode: rise time typ. 5-10 µs (from 0% to 80-90% of max. CW emission power, wavelength dependent) user selectable input impedance: 10 kOhms with pull-up or 50 Ohms pull-down Connector type 1-pin LEMO socket - 00.250 series Example: FFA.00.250.NTA Slow gate transition time < 1 ms Connector type 1-pin LEMO socket - 00.304 series Example: FGG.00.304.CLA Remote Interlock Voltage < 16 VDC Loop resistance 10 Ohms maximum Remote interlock connectors Lemo 00.304 and banana socket Computer PC interface USB 2.0 Operating system WindowsTM 8 / 8.1 / 10 Power Supply Line voltage 220 / 240 or 110 / 120 VAC, 50 / 60 Hz Power consumption 140 W maximum Dimensions Base unit 355 × 311 × 95 mm (w × l × h) Operation Environment Temperature range 10 to 40 °C Rel. humidity < 80%