marci tensiuni, turbine si adeziv pentru marci tensiune

    SEAP
    ID
    DA29416597
    Data
    02 Decembrie 2021
    Valoare
    11.795 RON
    Stare
    Oferta acceptata
    Autoritatea contractanta
    4278094 - Universitatea "Vasile Alecsandri" din Bacau
    Localitate
    Bacau, Bacau
    Furnizor
    15338272 - S.C. SPECTROMAS S.R.L. S.R.L.
    Tipul contractului
    Furnizare
    Cod CPV
    31221400-5 - Relee de tensiune alternativa (Rev.2)
    Descriere:
    marci tensiuni, turbine si adeziv pentru marci tensiune
    Achizitii
    495 RON
    Cantitate: 2
    Unitate masura: bucata
    Adeziv pentru marci tensometrice Z70 HBM
    Adeziv pentru marci tensometrice Z70 HBM Cyanoacrylate adhesive for strain gauges Cold curing one-component adhesive Thin liquide Can be used with all types of strain gauges Handling time (Pot life): - Storage capability (dry): - 6 months Temperature limits: - lower: -55°C (short periods -70°C) - upper, zero-point rel. measurement: +100°C - upper, non zero-point rel. measurement: +120°C Contents per package: 10ml adhesive (for approx. 250 strain gauges), Fluoropolymer release film, fluoropolymer strip, dosing tips and application guide Extra costs (DGR-fees) if dispatch via air freight: on request
    735 RON
    Cantitate: 3
    Unitate masura: pachet
    Freze tensiuni reziduale SINT-1-SINTCT2/1
    Inverted cone endmills for metals. Approx. Diameter 2mm - Air turbine device. Content per package: 5 pieces.
    1.700 RON
    Cantitate: 1
    Unitate masura: plic
    Marci tensiuni reziduale HBM-1-RY61-1.5/120R3
    Strain gage series Y (Determination of residual stress) Geometry: hole drilling rosette Measuring grid material: constantan Carrier foil: polyimide 3 grids, offset 0°/45°/90° Measuring grid covered 50 mm fluoropolymer-insulated wires + 4-wire 3m TPE ribbon cable attached Temp. response: ferr. steel (10.8 ppm/K) Nominal resistance: 120 ohms Measuring grid length: 1.5 mm Contents per package: 5 pcs.
    1.700 RON
    Cantitate: 1
    Unitate masura: plic
    Marci tensiuni reziduale HBM-1-RY61-1.5/120R5
    Strain gage series Y (Determination of residual stress) Geometry: hole drilling rosette Measuring grid material: constantan Carrier foil: polyimide 3 grids, offset 0°/45°/90° Measuring grid covered 50 mm fluoropolymer-insulated wires + 4-wire 3m TPE ribbon cable attached Temp. response: ferr. steel (10.8 ppm/K) Nominal resistance: 120 ohms Measuring grid length: 1.5 mm Contents per package: 5 pcs.
    1.700 RON
    Cantitate: 1
    Unitate masura: plic
    Marci tensiuni reziduale HBM-1-RY61-1.5/120R7
    Strain gage series Y (Determination of residual stress) Geometry: hole drilling rosette Measuring grid material: constantan Carrier foil: polyimide 3 grids, offset 0°/45°/90° Measuring grid covered 50 mm fluoropolymer-insulated wires + 4-wire 3m TPE ribbon cable attached Temp. response: ferr. steel (10.8 ppm/K) Nominal resistance: 120 ohms Measuring grid length: 1.5 mm Contents per package: 5 pcs.
    1.750 RON
    Cantitate: 1
    Unitate masura: bucata
    Turbina masina tensiuni reziduale 1-SINTT/1
    1-SINTT/1 Replacement air turbine for the MTS3000 system
    1.750 RON
    Cantitate: 1
    Unitate masura: bucata
    Turbina masina tensiuni reziduale 1-SINTT/2
    1-SINTT Replacement air turbine for the MTS3000 system