Sistem motorizare si automatizare rotatie cupola Pulsar

    SEAP
    ID
    DA27156288
    Data
    22 Decembrie 2020
    Valoare
    6.789,91 RON
    Stare
    Oferta acceptata
    Autoritatea contractanta
    4446465 - MUZEUL VASILE PARVAN BARLAD
    Localitate
    Barlad, Vaslui
    Furnizor
    26844542 - S.C. ASTROMAGAZIN S.R.L.
    Tipul contractului
    Furnizare
    Cod CPV
    38630000-0 - Instrumente optice si de astronomie (Rev.2)
    Descriere:
    The PULSAR Dome Drive is the latest development in automating your observatory. Designed for use with the Pulsar 2.7 metre dome or 2.2 metre dome, you can control your observatory from the LCD display panel or from the supplied software on your PC. The Pulsar Dome Drive system is supplied completely assembled, ready to install, using just 4 bolts. The LCD display panel will control the following functions: Move left and right Stop Angle display Go to angle Tracking speed display Change sidereal speed Open and close shutter (if shutter drive connected) Home Park Change brightness Battery level and charging status of shutter (if shutter drive connected) The supplied PULSAR Observatories Software package allows full control of the observatory from a computer, and includes an ASCOM driver for use with third party software, i.e. Maxim DL, to allow full synchronisation with your telescope. The Pulsar software will control the following functions: Move left and right Stop Angle display Go to angle Sidereal speed display Change home angle Change park angle Shutter status SCOPE OF DELIVERY Dome controller Encoder unit Power supply Hardware (fixing kit, etc) Software (WINDOWS) Technical Data
    Achizitii
    6.789,91 RON
    Cantitate: 1
    Unitate masura: bucata
    Sistem motorizare si automatizare rotatie cupola Pulsar
    The PULSAR Dome Drive is the latest development in automating your observatory. Designed for use with the Pulsar 2.7 metre dome or 2.2 metre dome, you can control your observatory from the LCD display panel or from the supplied software on your PC. The Pulsar Dome Drive system is supplied completely assembled, ready to install, using just 4 bolts. The LCD display panel will control the following functions: Move left and right Stop Angle display Go to angle Tracking speed display Change sidereal speed Open and close shutter (if shutter drive connected) Home Park Change brightness Battery level and charging status of shutter (if shutter drive connected) The supplied PULSAR Observatories Software package allows full control of the observatory from a computer, and includes an ASCOM driver for use with third party software, i.e. Maxim DL, to allow full synchronisation with your telescope. The Pulsar software will control the following functions: Move left and right Stop Angle display Go to angle Sidereal speed display Change home angle Change park angle Shutter status SCOPE OF DELIVERY Dome controller Encoder unit Power supply Hardware (fixing kit, etc) Software (WINDOWS) Technical Data