Piranometru Kipp&Zonen model CMP22 + Pirgiometru Kipp&Zonen CGR4

    SEAP
    ID
    DA23343559
    Data
    21 Iunie 2019
    Valoare
    69.210 RON
    Stare
    Oferta acceptata
    Autoritatea contractanta
    9113623 - INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU OPTOELECTRONICA - INOE 2000
    Localitate
    Magurele, Ilfov
    Furnizor
    25730485 - S.C. INOESY S.R.L.
    Tipul contractului
    Furnizare
    Cod CPV
    38126200-6 - Aparate de observare la suprafata a radiatiilor solare (Rev.2)
    Descriere:
    Piranometru Kipp&Zonen model CMP22 + Pirgiometru Kipp&Zonen CGR4
    Achizitii
    36.570 RON
    Cantitate: 1
    Unitate masura: bucata
    Piranometru Kipp&Zonen model CMP22
    CMP22 Pyranometer CMP22 is a ISO 9060:2018 Spectrally Flat Class A pyranometer that has all the features of CMP21 but uses very high quality quartz domes for a wider spectral range, improved directional response, and reduced thermal offsets. Because of the high optical quality of these domes the directional error is reduced below 5 W/m². Kipp & Zonen is confident that CMP22 is the best pyranometer currently available. CMP22 has individually optimised temperature compensation and a standard thermistor sensor is fitted to monitor the housing temperature. Each instrument is supplied with its own temperature and directional (cosine response) test data. A waterproof socket is fitted for the signature yellow signal cable, which is available in a range of lengths pre-wired to the waterproof plug. The integral bubble level is raised to the top of the housing and can be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The screw-in drying cartridge is easy to remove and the replacement desiccant is supplied in convenient refill packets. The pyranometer does not require any power, it supplies a low voltage of 0 to 20mV in relation to the amount of incoming radiation. When a higher voltage level or a 4 to 20mA signal is required, the AMPBOX is the perfect solution.
    32.640 RON
    Cantitate: 1
    Unitate masura: bucata
    Pirgiometru Kipp&Zonen CGR4
    CGR4 Pyrgeometer CGR4 pyrgeometer is an instrument for the highest quality scientific measurements. The specially designed meniscus dome provides a 180º field of view with negligible directional response error. A hard-carbon coating on the outside of the dome smoothes the spectral response and provides extra protection to the silicon surface. The excellent thermal stability of the dome construction and coupling to the instrument body eliminates the need for dome temperature measurements or dome shading. CGR4 can be fitted with the CVF4 ventilation unit to further improve its performance. A waterproof socket is fitted for the signature yellow signal cable, which is available in a range of lengths pre-wired to the waterproof plug. The integral bubble level is raised to the top of the housing and can be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The connector with gold-plated contacts allows for easy exchange and re-calibration. The screw-in drying cartridge is easy to remove and the replacement desiccant is supplied in convenient refill packets.