Raspberry Pi 3 Model B+ CanaKit Ultimate Starter Kit

    SEAP
    ID
    DA23307504
    Data
    18 Iunie 2019
    Valoare
    1.704 RON
    Stare
    Oferta acceptata
    Autoritatea contractanta
    4317754 - UNIVERSITATEA TRANSILVANIA BRASOV
    Localitate
    Brasov, Brasov
    Furnizor
    14581515 - S.C. Muncons S.R.L.
    Tipul contractului
    Furnizare
    Cod CPV
    30215100-0 - Unitati centrale de procesare pentru microcomputere (Rev.2)
    Descriere:
    Raspberry Pi 3 Model B+ (B Plus) with 1.4GHz 64-bit quad-core ARMv8 CPU (BCM2837B0) - 1 GB LPDDR2 SDRAM - Dual Band 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac Wireless LAN, Enhanced Ethernet Performance - Class 10 High Performance MicroSD Card - Raspberry Pi Recommended MicroSD Card with NOOBS - CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 3 (5-foot cable) - Premium Quality Raspberry Pi 3 Case - Premium Quality HDMI Cable with CEC support (6.5 feet cable) - Heat Sink - GPIO and Resistor Colors Quick Reference Cards - CanaKit GPIO to Breadboard Interface Board - GPIO Ribbon Cable - Full-Size Large Breadboard - 32 x M/M Jumper Wires - 10 x M/F Jumper Wires - RGB LED - 2 x Red LEDs - 2 x Green LEDs - 2 x Yellow LEDs - 2 x Blue LEDs - 2 x Push Button Switches - 10 x 220 Ohm Resistors - 5 x 10K Ohm Resistors - CanaKit General Guide for Beginners to Electronic Components - CanaKit General Assembly Guide
    Achizitii
    852 RON
    Cantitate: 2
    Unitate masura: bucata
    Raspberry Pi 3 Model B+ CanaKit Ultimate Starter Kit
    Raspberry Pi 3 Model B+ (B Plus) with 1.4GHz 64-bit quad-core ARMv8 CPU (BCM2837B0) - 1 GB LPDDR2 SDRAM - Dual Band 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac Wireless LAN, Enhanced Ethernet Performance - Class 10 High Performance MicroSD Card - Raspberry Pi Recommended MicroSD Card with NOOBS - CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 3 (5-foot cable) - Premium Quality Raspberry Pi 3 Case - Premium Quality HDMI Cable with CEC support (6.5 feet cable) - Heat Sink - GPIO and Resistor Colors Quick Reference Cards - CanaKit GPIO to Breadboard Interface Board - GPIO Ribbon Cable - Full-Size Large Breadboard - 32 x M/M Jumper Wires - 10 x M/F Jumper Wires - RGB LED - 2 x Red LEDs - 2 x Green LEDs - 2 x Yellow LEDs - 2 x Blue LEDs - 2 x Push Button Switches - 10 x 220 Ohm Resistors - 5 x 10K Ohm Resistors - CanaKit General Guide for Beginners to Electronic Components - CanaKit General Assembly Guide