Sticla bruna cu dop rodat de 500ml

    SEAP
    ID
    DA21481255
    Data
    16 Octombrie 2018
    Valoare
    3.450 RON
    Stare
    Oferta acceptata
    Autoritatea contractanta
    11327130 - Directia de Sanatate Publica Vaslui
    Localitate
    Vaslui, Vaslui
    Furnizor
    23322412 - S.C. CIPROD INTERMED S.R.L.
    Tipul contractului
    Furnizare
    Cod CPV
    39299000-4 - Articole din sticla (Rev.2)
    Descriere:
    sticla bruna cu dop rodat de 500ml pentru colectarea probelor de apa. cu dop din sticla. gat larg NS45/40 gat ingust NS24/29 it can be autoclaved but in a controlled process. All the glass endures 500Cº if they are slowly heated and slowly cooled down. resistant to thermal shocks, nevertheless the manufacturer of the glass tubing recommend not to use a difference of temperatures higher than 120º C to avoid thermal shock. This means even though the glass resists to temperatures of 500ºC, it cannot resist if we put the material inside an oven at 500ºC forcing it to go from 20ºC to 500ºC in seconds. The same happens if we have it in an oven at 500ºC and we take it out and put it on the table at 20ºC. In these cases, there is a thermal shock that can cause breakage. The way to avoid thermal shock is to heat the material slowly and cool it slowly.
    Achizitii
    69 RON
    Cantitate: 50
    Unitate masura: buc
    Sticla bruna cu dop rodat de 500ml
    sticla bruna cu dop rodat de 500ml pentru colectarea probelor de apa. cu dop din sticla. gat larg NS45/40 gat ingust NS24/29 it can be autoclaved but in a controlled process. All the glass endures 500Cº if they are slowly heated and slowly cooled down. resistant to thermal shocks, nevertheless the manufacturer of the glass tubing recommend not to use a difference of temperatures higher than 120º C to avoid thermal shock. This means even though the glass resists to temperatures of 500ºC, it cannot resist if we put the material inside an oven at 500ºC forcing it to go from 20ºC to 500ºC in seconds. The same happens if we have it in an oven at 500ºC and we take it out and put it on the table at 20ºC. In these cases, there is a thermal shock that can cause breakage. The way to avoid thermal shock is to heat the material slowly and cool it slowly.